AdderLink INFINITY 100T Compact Single-Monitor Network DVI Extender Transmitter, DVI and USB Extension Over Gigabit Ethernet, Copper (RJ45), Max Resolution is 1920X1200.
ADDERLink INFINITY 100T (ALIF100T) is
a zero-U, high performance, IP-based KVM
(Keyboard, Video, Mouse) extender and/or
matrix that enables the us e of standard IT
infrastructure to extend computers away
from the user environment.
The ALIF100T takes zero-U of rack space
in the server room allowing for ultimate
flexibility and ease of installation.
Use your existing networking
infrastructure to extend or matrix your
computing resources to your users.
The device can be powered from USB.
This means there is no need to provision
for an external PSU. Options for powering
from an external PSU or redundant PSU
are also available.
Low power consumption
Requiring less than 3 Watts, the unit can
be powered from USB. This means it could
use less than a quarter of the energy
when compared to other solutions.
Multiple video options
The system supports resolutions to a
maximum of 1920x1200@60Hz through
either DVI, DisplayPort or VGA* interfaces
(* requires DVA accessory).
Enables you to connect any USB human
interface device from mice and keyboards
through to graphics tablets, jog shuttles,
joysticks and 3D explorers.
Seamless integration with the AdderLink
The ALIF100T can integrate seamlessly
into your existing ADDERLink Infinity
setup, replacing or working in conjunction
with your existing ALIF endpoints.
Perfect digital video
The ALIF100T uses an encoding system
that is spatially-lossless, with 1:1 pixel
mapping, so the digital video you receive
is the same as the digital video leaving the
remote computer ensuring the very best
picture available and colour accuracy.
The system delivers USB stereo audio
(Line In, Line Out) digitally across the
The system has intelligent EDID
management to either allow the true
characteristics of the monitor to
be passed back to the computer, or
controlled resolutions to be imposed.
Digital KVM matrix
By the addition of ADDERLink Infinity
Management system (A.I.M.) you can turn
multiple point to point extenders into a
matrix system that allows any workstation
to connect to any computer connected
to the network. See the A.I.M. data sheet