2UKVM-125-4-19V Rackmount KVM Tray

Description

4-Post 19" Rackmount Sliding Keyboard, Monitor & Mouse Tray (2U), 19" LCD VGA Monitor, Keyboard With integrated Mouse Track Pad, PS/2 Or USB With Adapters (Included).

The rackmount monitor kit allows you to install a standard, flat panel monitor into a rack in a cost efficient manner. The kit supports flat panel monitors with 75 mm or 100 mm hole patterns. The rackmount monitor kit may be installed in racks with an installation depth from 15.5" (394 mm) to 31.5" (800 mm). Compatible with most KVM switches. USB conversion cable is included.

Specifications

• Interface - PS/2 and VGA interface available from KVM switch
• Rack Units - 2U
• Rack Type - 4 Post
• Included Hardware
  • 10-32 and 12-24 Screws
  • Cage nuts provided for square hole racks
• Mounting Depth Range - 15.5" - 31.5" (394 - 800 mm)
• Rail Type
  • 28" travel (394 mm)
  • Ball bearing slides
• Overall Installation Depth - 31" Minimum (787 mm)
• Cable Management - Articulated cable management arm
• VESA Mount
  • 100 mm or 75 mm VESA hole patterns (required)
  • Most LCD display have 4 VESA mounting holes on the back
  • The VESA holes may be hidden by the display stand
• Monitor Width
  • LCD display width: 17.5" (444 mm) maximum
  • 15", 17" or 19" (381 mm, 432 mm or 483 mm) LCD display will typically fit
• Monitor Thickness
  • LCD display thickness: 2.75" (70 mm) maximum
  • Exceeding this thickness will require more than 2U of rackmount space
• Monitor Specs
  • 19” (483 mm) monitor specs
    • Dell E190S (optional)
    • Height 16.2" x Width 16.3"
    • 1280 x 1024 pixels @ 75Hz max resolution
    • TFT active matrix
    • 300 cd/m² brightness
    • 800:1 image contrast ratio
    • VGA signal input
• Keyboard Specs
  • PS/2 or USB
  • USB Interface requires the use of an adapter (included)
  • 88/89 keys have the functionality of a 104/105 rack mount keyboard
  • Embedded numeric keypad and 12 dedicated function keys
• Assembly Notes
  • Fully assembled, except for optional monitor
  • Power, VGA, and keyboard cables are pre-routed