rdc232Enet Ethernet Converter

Description

Robust DataComm Serial (RS-232) to Ethernet Converter, Modbus/TCP Supported, DB9 Serial Connection, DIN-Rail Mount, 9-36 VDC Powered.

The rdc232Enet safely and easily connects an industrial device with serial interface (RS-232) to an Ethernet network while providing the ultimate in isolation, surge, and noise protection. The RS-232 port and network port are isolated from each other, as well as the DC supply ground. 600w transient suppressor diodes further protect the RS-232 port from momentary surges. Standard industrial automation protocols like Modbus/TCP is also supported.

Isolation, industrial design, small size, DIN rail mount, user indication, and wide range DC supply make the rdc232Enet a very engineer friendly device for your industrial data communication system.

Specifications

• Network Interface
  • Standards : TCP/IP, UDP/IP, DHCP, SNMP, SSL/TLS, HTTP, SMTP, ICMP, IGMP and ARP
  • Interface : 10/100Base-T Ethernet
  • Connector : RJ45
  • User Indications : Network Link and Activity indication
• Serial Interface
• Interface : EIA/RS-232E
• Connector : DB9 Male DTE
• Data Rate : Up to 115,200 bps (configurable)
• Characters : Configurable (5,6,7,8 databits)
• Parity : Configurable (odd,even,none,mark,space)
• Stop Bits : Configurable ( 1,2 bits)
• User Indications : Txd and Rxd Indication
• Isolation
• RS-232 to Ethernet: complete galvanic isolation 2.5Kv
• Supply to Ethernet: complete galvanic isolation 2.5Kv
• Supply to RS-232: complete galvanic isolation 2.5Kv
• Power Supply
• 9~36 vDC: 2.5w normal operation
• 5vDC +/-5%: 400mA normal operation
• User Indication: Green LEDs for power indication
• Mechanical / Environment
• Operating Range: -20C to +65C
• Storage Range: -40c to +100C
• Relative Humidity: 10 to 90% RH, non-condensing
• D-shell Connector: 9-pin, 30μ gold pins/sockets rated 500 cycles
• Case Material: nylon polymide, fungus and termite resistant self-extinguishing
• Weight: approx 130g
• Mounting Rail: DIN EN 50 022 or DIN EN 50 035